電子及電氣技術-英譯中模板

1.? High-Performance Automotive-Grade Microcontroller for Safety-Critical Applications

高性能汽車級微控制器，用于與安全密切相關的應用
– Dual CPUs Running in Lockstep

運行步伐一致的雙CPU
– ECC on Flash and RAM Interfaces

對閃存及隨機存儲器接口進行錯誤檢查及糾正

– Built-In Self-Test (BIST) for CPU and On-chip RAMs

內置中央處理器及片上只讀存儲器自測功能（BIST）
– Error Signaling Module With Error Pin

帶有錯誤引腳的錯誤信號傳送模塊，

– Voltage and Clock Monitoring

電壓及時鐘監控
? ARM® Cortex®-R4F 32-Bit RISC CPU

ARM® Cortex®-R4F，32位精簡指令集中央處理器
– 1.66 DMIPS/MHz With 8-Stage Pipeline

運算速度為166萬條指令每秒/兆赫茲，8通道
– FPU With Single- and Double-Precision

浮點運算單元，包含單精度和雙精度
– 12-Region Memory Protection Unit (MPU)

12個區域存儲器保護單元（MPU）
– Open Architecture With Third-Party Support

開放的架構，由第三方支持
? Operating Conditions

運行條件
– Up to 180-MHz System Clock

系統時鐘頻率最高可達180兆赫茲
– Core Supply Voltage (VCC): 1.14 to 1.32 V

芯片供電電壓（VCC）為：1.14 到1.32 V
– I/O Supply Voltage (VCCIO): 3.0 to 3.6 V

輸入/輸出供電電壓(VCCIO)為：3.0 到3.6 V
Packages

封裝

– 144-Pin Quad Flatpack (PGE) [Green]

四邊形平版封裝，144個引腳（PGE）[綠色]

– 337-Ball Grid Array (ZWT) [Green]

網格陣列封裝，337個球形引腳（ZWT）[綠色]

2.Once the output buffer has driven the output to a low level, if the output voltage is below VREFLOW, then the output buffer’s impedance will increase to hi-Z. A high degree of decoupling between the internal ground bus and the output pin will occur with capacitive loads, or any load in which no current is flowing, e.g. the buffer is driving low on a resistive path to ground. Current loads on the buffer which attempt to pull the output voltage above VREFLOW will be opposed by the buffer’s output impedance so as to maintain the output voltage at or below VREFLOW.

當輸出緩沖器將輸出驅動到一個較低的電壓水平時，如果輸出電壓低于VREFLOW,那么輸出緩沖器的阻抗將增加到高阻狀態。在使用容性負載或者任何無電流流過（例如，當一條接地電阻路徑的電壓被緩沖器驅動為低水平時）的負載時，內部接地母線與輸出引腳之間將發生高度解耦。緩沖器上用于拉高輸出電壓（使其高于 VREFLOW）的電流負載將與緩沖器的輸出阻抗成反比，可以確保輸出電壓小于或等于VREFLOW。